Andrew ES45T Manual do Utilizador descarregar pdf (Página 42)

Step 14

Step 15

Step 16

Step 17

Installation Procedures

Raise lower portion of reflector/backstructure assembly and attach remaining end of ele-

vation strut to elevation axis bracket of main triangle assembly.

• Use 3/4 x 4-1/2 in (114 mm) bolt, lockwasher and nut

• Mechanical means or fine adjustment assembly may be utilized to achieve elevation

angles greater than 30°.

Set fine elevation and azimuth strut positions based on the procedure performed in the

Elevation and Azimuth Adjustments section.

• If fine alignment is not performed at this time, continue the assembly procedure at

Step 16.

Securely tighten U-bolts and elevation strut mounting hardware.

Remove both fine adjustment assemblies and store in a weather protected location for

future use. Continue with feed system and corresponding LNA installation.

You have now completed the attachment of the reflector to the tripod ground mount

assembly. If installing an ES45T-R antenna, advance to the Elevation and Azimuth

Adjustments section for instructions on pointing your antenna to its satellite.

ES45T-R Reflector Assembly

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 80 81

Sem comentários

Andrew ES45T Manual do Utilizador Página 42